Showtex Assessment

Your basic event health and safety knowledge is assessed by answering these 40 questions.
- There is only one correct answer per question.
- You're only allowed 20 minutes (timer is at bottom right of your screen) so don't go googling answers.
- As soon as you've answered the question, you cannot go back to change your answer.
- Unanswered questions count as wrong answers.
Begin by typing your name and email in the fields below to receive your results.

Name Email
1)

Why should you avoid waste buildup on your event site?

2) Which document is necessary when a temporary structure is completed?
3) When working at night, what must you do?
4) What is the maximum height to base ratio of a scaffold?
5) What can you use to keep an object(such as a lamp) from falling, should the primary fastening fail?
6) When do you have the highest dynamic loads in a rig?
7) When does your staff need to wear a helmet on site?
8) During a site inspection, what should you ask for if you want to hang a lighting rig?
9) Must a risk assessment be available to staff on site?
10) How many newtons are 100 kg?
11)

Which fire extinguisher should be used for electrical fires?

12)

When do you need a staff member trained in first aid on your event site.

13) What kind of force is a dynamic load?
14) How much does water weigh per cubic meter?
15) How must a generator fuel tank be constructed?
16) When leaning a ladder against a wall, what ratio must be applied?
17) What are RCD’s or ELCB’s for?
18) What are circuit breakers for?
19) What is a hot works permit?
20) When coming on site, what should a supervisor do first?
21) Who must supply PPE?
22) Before placing heavy objects on an exhibition floor, what do you ask the venue?
23)

What license does the driver of a cherry picker need?

24) When setting up generators, the following is true.
25) How do you know a fire extinguisher is usable?
26) You see a worker in flip flops working on a stage. What do you do?
27) How do you promote a good safety culture?
28) What is "lock out tag out"?
29)

What is a risk assessment?

30)

What mainly determines the size of a power cable?

31) Are knots allowed in wire ropes?
32) What hazards exist when using a CO2 extinguisher?
33) When using power tools, what’s the first thing you should do?
34) Why must cables always have the proper rating?
35) What is the safest way to access a lighting fixture that is 10 meters high?
36) What do you need to do during the summer time in the UAE when working outside?
37) What does not belong in a site induction?
38) On a drawing, you see 1:200. What does this mean?
39) Which 3 conditions are necessary to start a fire?
40) When planning a small exhibition in a hotel, which document is most important for the planning process?

Thanks for taking the assessment.
Now,

- press the submit button

- go to your inbox for your results.

Bruno