Welcome to the Event Health and Safety Advisor Assessment.
Your knowledge of event-specific safety is assessed by answering the following 40 questions. At the end of the assessment, you will receive feedback on how well you did.
Instructions:
There can be more than one correct answer per question.
You're only allowed 20 minutes (timer is at the bottom right of your screen).
Once you've selected an answer, it cannot be changed.
You must answer all questions.
When you're finished, please type in your name and email and click submit to see your results.
Should you encounter any problems, send me an email at the email address you'll receive with your results.
Start taking the assessment by clicking the "Next" button.
1.
What are circuit breakers for?
2.
Why must cables always have the proper conductor size?
3.
What are RCD’s or ELCB’s for?
4.
Is the length of a cable important?
5.
How must a cable be protected if it crosses pathways?
6.
What is a risk assessment?
7.
Which license does the driver of a Mobile Elevated Work Platform need?
8.
Which fire extinguisher should be used for an electrical fire in an electrical distribution panel?
9.
When do you need a staff member trained in first aid on your event site?
10.
Why should you avoid waste buildup on your event site?
11.
What can you use to keep an object(such as a lamp) from falling, should the primary fastening fail?
12.
How must a generator fuel tank be constructed?
13.
When first coming on site, what should a supervisor do?
14.
Which hazards exist when using a CO2 extinguisher?
15.
How do you know a fire extinguisher is usable? (check all that apply)
16.
Which document is necessary when a temporary structure is completed?
17.
What is a Hot Works Permit?
18.
When work is going on at night, what must you do?
19.
When using power tools, what’s the first thing you should do?
20.
What kind of force is a dynamic load?
21.
When do you have the highest dynamic loads in a lighting rig?
22.
Are knots allowed in wire ropes?
23.
Before placing heavy objects on an exhibition floor, what do you ask the venue?
24.
How many Newtons are 100 kg?
25.
When planning a small exhibition in a hotel, which document is most important for the planning process?
26.
When leaning a ladder against a wall, which height to distance (from the wall) ratio must be applied?
27.
What is the safest way for a lighting technician to access a lighting fixture that is 10 meters high?
28.
When does your staff need to wear a helmet on-site?
29.
Must a risk assessment be available to staff on site?
31.
What does not belong in a site induction?
32.
Which 3 elements are necessary to start a fire?
33.
When must outriggers be used on a mobile scaffold?
34.
On a drawing, you see 1:200. What does this mean?
35.
You see a worker in flip flops working on a stage. What do you do?
36.
When setting up generators, which of the following is most important?
37.
What is the main reason for writing an Incident Report?
38.
How much does 1 cubic meter of water weigh?
39.
During a venue inspection, what should you ask for if you want to hang a lighting rig?
40.
When calculating visitor capacity, which density is the safest?
